当前位置: 网站首页 > 新闻动态 > 行业资讯

新闻动态

NEWS

  • 不锈钢真空镀钛的注意事项?
  • 本站编辑:海盐鑫中岳电子科技有限公司发布日期:2022-04-12 10:08 浏览次数:

不锈钢真空镀钛是一种非常流行的表面处理方法,在智能穿戴、传统表业、五金首饰等方面应用非常多,可能还有很多人不知道镀钛。

Vacuum titanium plating on stainless steel is a very popular surface treatment method. It is widely used in intelligent wear, traditional watch industry, hardware jewelry and so on. Many people may not know titanium plating.

玫瑰金、钛金、黑钛、香槟金等颜色都是电镀钛加工而成。虽然不锈钢真空镀钛可以使不锈钢表面非常漂亮,但在加工过程中也有很多注意事项。如果不注意镀层产品,会出现缺陷。

Rose gold, titanium gold, black titanium, champagne gold and other colors are processed by electroplating titanium. Although vacuum titanium plating on stainless steel can make the surface of stainless steel very beautiful, there are also many precautions in the processing process. If you do not pay attention to the coated products, defects will appear.

电镀时,由于非不锈钢夹层的存在,基体镀层之间往往无法形成连续的结晶结构,导致镀层起泡或脱落等不良缺陷。

During electroplating, due to the existence of non stainless steel interlayer, continuous crystal structure can not be formed between the substrate coatings, resulting in blistering or falling off of the coatings and other undesirable defects.

因此,氧化皮、锈蚀和氧化物等变质层必须清除干净。虽然加工层和镀层可以牢固结合,但不需要用腐蚀法去除,一般只需酸洗即可。

Therefore, the oxide scale, rust, oxide and other metamorphic layers must be removed. Although the processing layer and the coating can be firmly combined, they do not need to be removed by corrosion method, and generally only need to be pickled.